9100 SERIES
VIEWSTATION AND RECORDER
Quick Start Guide
VIEWSTATION
ᕢ
POWER
CONNECTION
ᕥ
10/100/1000 BASE-T ETHERNET INTERFACE:
ALLOWS MULTIPLE VIEWSTATIONS
AND RECORDERS
ᕡ
ᕢ
1
4
MAXIMUM 16
CAMERA INPUTS
(VIDEO IN)
Term
Loop
75
HI-Z
ᕣ
ᕣ
n
1
2
RECORDER
1
4
9
12
5
8
13
16
Ter
Loo
75
Term
Loop
75
Term
Loop
75
Term
Loop
75
HI-Z
HI-Z
HI-Z
HI-Z
Rel
Alarm Inputs
Rel
Alarm Inputs
In
1
2
3
4
5
6
7
8
Out
1
1
2
3
4
5
6
7
8
Com
2
9
10
11
12
13
14
15
16 Com
In
9
10
11
12
13
14
15
16
AUDIO INPUTS
Out
1
2
5
6
9
13
14
10
FOR
FUTURE
3
4
7
8
11
12
15
16
POWER
CONNECTION
USE
ᕥ
ᕤ
HASP KEY
(INTO THE BOTTOM RIGHT USB PORT)
ᕢ
ᕢ
Figure 2. System Connections
C635M-QS (8/03)
3
SETTING DATE/TIME PROPERTIES
Follow these steps to set the Date/Time Properties on the recorder and the viewstation. Make sure you close all applications on
the recorder and viewstation.
ᕣ
ᕡ Double-click the time on the system tray.
The following page appears.
ᕢ
Figure 3. Date and Time Page
ᕢ Set the date and time and then click Apply.
ᕣ Click Time Zone. The following page appears.
ᕤ
ᕥ
ᕦ
Figure 4. Time Zone Page
ᕤ Select your time zone from the drop-down box. The default is (GMT -08:00) Pacific Time (US & Canada); Tijuana.
NOTE: You must restart the system if you change the default time zone setting on the recorder or viewstation.
ᕥ Make sure that the “Automatically adjust clock for daylight saving changes” checkbox is selected, if applicable for the
location of installation.
ᕦ Click Apply and then OK.
4
C635M-QS (8/03)
SERVER CONFIGURATION UTILITY
To open this application, double-click the DX9000 Server Configuration Utility icon on your recorder’s desktop.
ᕡ Set the frame rate and resolution. The number of channels is set automatically.
ᕢ Select the recording format. The default is NTSC.
ᕣ Click Server Identification to change the computer name (default is Pelco1) and IP address (default is 100.0.0.101).
NOTE: Each recorder must have a unique recorder name and IP address.
ᕤ Enter the multicast group number. The last three numbers must match the last three numbers of the IP address. The default
is 239.0.0.101.
ᕥ Click Configure.
ᕦ Restart the recorder.
ᕣ
ᕡ
ᕢ
ᕤ
ᕥ
Figure 5. Server Configuration Utility
C635M-QS (8/03)
5
CLIENT CONFIGURATION UTILITY
You can find this application on the viewstation. With this application you can build a list of local servers and export them to the
recorders.
ᕡ Make sure that the recorder and viewstation are connected to the network switch.
ᕢ Go to Start > Programs > DX9000 Viewstation > Client Configuration Utility.
ᕣ Log in. The default user name and password is admin/admin. The following page appears.
ᕨ
ᕤ
ᕧ
ᕥ
ᕦ
Figure 6. Client Configuration Utility Page
ᕤ Select “Build a list of local servers.”
ᕥ Select “Custom naming.”
NOTE: The Standard naming option is used if all recorders have the same name and the only difference is the numbers. For
example, Pelco1, Pelco2, Pelco3.
ᕦ Enter a recorder name and then click Add.
ᕧ Click Configure.
NOTE: Repeat steps 6 and 7 for each recorder.
ᕨ Select “Export to server” and then the name of the first recorder from the drop-down box.
ᕩ Click Configure.
NOTE: Repeat steps 8 and 9 for each recorder that is in the drop-down box.
6
C635M-QS (8/03)
TIME SYNCHRONIZATION
Go back to the Server Configuration Utility on the recorder to complete time synchronization.
ᕡ Click Suggest to see a list of the recorders that were exported in the Client Configuration Utility.
ᕢ Click Configure.
NOTE: Repeat steps 1 and 2 on each physical recorder.
ᕣ Restart all recorders and viewstations.
ᕡ
Figure 7. Define Time Synchronization
Refer to the DX9100 Digital Video Recorder & Viewstation Installation manual for further programming instructions and to the
DX9100 Viewstation Operation manual for instructions on viewing video.
C635M-QS (8/03)
7
World Headquarters
3500 Pelco Way
Clovis, California 93612 USA
USA & Canada
Tel: 800/289-9100
Fax: 800/289-9150
International
Tel: 1-559/292-1981
Fax: 1-559/348-1120
ISO9001
Orangeburg, New York | Las Vegas, Nevada | Eindhoven, The Netherlands | Wokingham, United Kingdom | Montreal, Canada | Singapore
® Pelco and the Pelco logo are registered trademarks of Pelco.
C635M-QS (8/03)
© Copyright 2003, Pelco. All rights reserved.
|
Pelco Car Video System C2927M User Manual
Peripheral Electronics Car Stereo System Aux2Car User Manual
Philips Bottle Warmer SCF660 User Manual
Philips Car Video System JENHR1D User Manual
Philips Cell Phone SE565 User Manual
Philips Electric Shaver TT2020 User Manual
Philips MP3 Player Accessories WAS6050 User Manual
Planar Car Video System IX2850 User Manual
Plantronics Headphones CS 70 User Manual
Polar Automobile Parts Y6 User Manual